Attachment Exhibit F

This document pretains to SES-LIC-20150402-00188 for License on a Satellite Earth Station filing.

IBFS_SESLIC2015040200188_1081412

Exhibit F Manufacturer Certifications

Sea Tel Inc. 4030 Nelson Ave., Concord California, 94520, USA T: +1 (925) 798-7979 F: +1 (925) 798-7986 FCC Declaration of Conformity 1. Sea Tel, Inc. designs, develops, manufactures and services marine stabilized antenna systems for satellite communication at sea. These products are in turn used by our customers as part of their Ka- band Earth Station on Mobile Platform (ESoMP) networks. 2. FCC regulation 47 C.F.R. § 25.138 defines the provisions for blanket licensing of GSO FSS Earth Stations operating in the Ka Band. 3. Sea Tel hereby declares that the antennas listed below will meet the off-axis EIRP spectral density requirements of § 25.138 (a)(1) with an N value of 1, when the following Input Power spectral density limitations are met: 0.6 Meter Ka Band, Model GX 60, is limited to -10.5 dBW/40kHz 1.0 Meter Ka Band, Model 4012 GX, is limited to -10.5 dBW/40kHz 4. Sea Tel hereby declares that the antennas referenced in paragraph 3 above, will maintain a stabilization pointing accuracy of better than 0.2 degrees under specified ship motion conditions. 5. Sea Tel hereby declares that the antennas referenced in paragraph 3 above, will automatically cease transmission within 100 milliseconds if the pointing error should exceed 0.5 degrees and will not resume transmission until the error drops below 0.2 degrees. 6. Sea Tel maintains all relevant test data, which is available upon request, to verify these declarations. Peter Blaney, Chief Engineer Sea Tel, Inc Concord, CA Document Number 99-144705 Revision A 09-Dec-2014

12 Dec 2014 JRC) Fapan Radio Co. ltd. 1—1, Shimorenjaku 5 Chome, Mitaka—shi Tokyo 181—8510, JAPAN Phone +81—422—45—9381 Fax +81—422—45—9923 Pointing Accuracy declaration for Global Xpress JUE—60GX Japan Radio Co., Ltd. hereby certifies that JUE—60GX will maintain a stabilization pointing accuracy of better than 0.2 degrees and will automatically cease transmission within 100 milliseconds if the pointing error should exceed 0.5 degrees and will not resume transmission until the error drops below 0.2 degrees. fl”/_/ji/ Shigeru Sench Manager, Maritime Satellite Communications Group Engineering Department

COEBHAIAMIT Cobham SATCOM Lundtoftegaardsvej 93 D 2800 Kgs. Lyngby Denmark T: +45 39 55 88 00 F: +45 39 55 88 88 Declaration of Thrane & Thrane A/S 1. This declaration refers to the following Thrane & Thrane antenna model: TT— 7090C SAILOR 100 GX system, Maritime Ka—Band system. 2. Thrane and Thrane A/S hereby declares that the antenna referenced in 1, above, will maintain a stabilization pointing accuracy of 0.2 degrees RMS or less under specified ship motion conditions. 3. Thrane and Thrane A/S hereby declares the antenna referenced in 1, above, will automatically cease transmission within 100 milliseconds if the pointing error should exceed 0.5 degrees and will not resume transmission until the pointing error drops below 0.2 degrees. Date: O//Z2 —20/ ¢ ) 27) Vibeke Fink R&D Director Thrane & Thrane A/S Thrane & Thrane A/S trading as Cobham b SATCOM . www.cobham.com Registered no.: DK — 65 72 46 18. Registered address: Lundtoftegaardsvej 93 D, 2800 Kgs. Lyngby, Denmark

Pointing Accuracy and Auto TX Shutdown We, Intellian Technologies, Inc. hereby certifies that the Intellian GX60 will maintain a stabilization pointing accuracy of better than 0.2 degrees and will automatically cease transmission within 100 milliseconds if the pointing error should exceed 0.5 degrees and will not resume transmission until the error drops below 0.2 degrees. Product Information: Product Name: Intellian GX60, 65cm Ka-band Maritime Stabilized Antenna System Background: Intellian GX60 employs closed loop servo systems to keep the antenna pointed accurately at the satellite. The closed loop servo system includes highly accurate sensors continuously to monitor the antenna’s position in inertial space. In the normal operation, the servo mechanism keeps the antenna pointing within ±0.1° degrees RMS and the pointing accuracy is approximately 0.2° peak. However there always exists the possibility that unexpected conditions will cause the antenna to deviate outside this normal operation. Examples of some possible conditions are: • Unexpected mechanical disturbance from an external source. • Mechanical malfunction. • Ship motions beyond the pedestal specifications which cause very large accelerations on the axes. • Failure of one or more drive motors. • Sensor malfunction (Rate Sensors, GPS, Gyrocompass). Antenna Pointing Accuracy: At all times, the ACU (antenna control unit) continual monitors the antenna position as part of the normal servo loop operation of the antenna and compares a running average of the measured azimuth and elevation to the desired azimuth and elevation positions. If the antenna becomes miss-pointed by exceeding 0.5° from the axis of the main lobe of the target satellite, then the ACU will send a “cease transmissions” signal by providing a TX MUTE instruction to the below-deck satellite modem within 100 milliseconds. The ACU will suppress the signal until the off-axis angle is within 0.2° of the target satellite. Authority: Kevin Eom/ CTO, Research and Development Signature: Date: December 11, 2014 Intellian Technologies USA, Inc. Intellian Technologies, Inc. Doc Number IT14-DC1211-02 US Headquarters EMEA & APAC Headquarters 9004 Research Drive 18-7, Jinwisandan-ro, Jinwi-myeon, Pyeongtaek-Si, Irvine, CA 92618 USA Gyeonggi-do 451-862, Korea Tel: +1 949 727 4498 Tel: +82 2 511 2244

Pointing Accuracy and Auto TX Shutdown We, Intellian Technologies, Inc. hereby certifies that the Intellian GX100 will maintain a stabilization pointing accuracy of better than 0.2 degrees and will automatically cease transmission within 100 milliseconds if the pointing error should exceed 0.5 degrees and will not resume transmission until the error drops below 0.2 degrees. Product Information: Product Name: Intellian GX100, 1m Ka-band Maritime Stabilized Antenna System Background: Intellian GX100 employs closed loop servo systems to keep the antenna pointed accurately at the satellite. The closed loop servo system includes highly accurate sensors continuously to monitor the antenna’s position in inertial space. In the normal operation, the servo mechanism keeps the antenna pointing within ±0.1° degrees RMS and the pointing accuracy is approximately 0.2° peak. However there always exists the possibility that unexpected conditions will cause the antenna to deviate outside this normal operation. Examples of some possible conditions are: • Unexpected mechanical disturbance from an external source. • Mechanical malfunction. • Ship motions beyond the pedestal specifications which cause very large accelerations on the axes. • Failure of one or more drive motors. • Sensor malfunction (Rate Sensors, GPS, Gyrocompass). Antenna Pointing Accuracy: At all times, the ACU (antenna control unit) continual monitors the antenna position as part of the normal servo loop operation of the antenna and compares a running average of the measured azimuth and elevation to the desired azimuth and elevation positions. If the antenna becomes miss-pointed by exceeding 0.5° from the axis of the main lobe of the target satellite, then the ACU will send a “cease transmissions” signal by providing a TX MUTE instruction to the below-deck satellite modem within 100 milliseconds. The ACU will suppress the signal until the off-axis angle is within 0.2° of the target satellite. Authority: Kevin Eom/ CTO, Research and Development Signature: Date: December 11, 2014 Intellian Technologies USA, Inc. Intellian Technologies, Inc. Doc Number IT14-DC1211-01 US Headquarters EMEA & APAC Headquarters 9004 Research Drive 18-7, Jinwisandan-ro, Jinwi-myeon, Pyeongtaek-Si, Irvine, CA 92618 USA Gyeonggi-do 451-862, Korea Tel: +1 949 727 4498 Tel: +82 2 511 2244


Document Created: 2015-03-24 16:02:36
Document Modified: 2015-03-24 16:02:36
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC