Exhibit 2

0224-EX-PL-2007 Text Documents

Datron World Communications, Inc.

2008-01-08ELS_87030

From: Bruno Haineault To: Jose Trevino Date: December 12, 2007 Subject: FCC file number 0224-EX-PL-2007 ---------------------------------------------------------------------------------------------------------------- Message: Frequency Ranges Per page 2 of Form 442 Question 6: Description of Research Project, all of the listed frequencies are in MHz. The frequencies listed range from 2.1116 MHz to 27.4036 MHz for the HF side, 30.17 MHz to 75.975 MHz on the low-band VHF side and 136.0 MHz to 174.0 MHz on the hi-band VHF side. Per your E-mail, we went through our filing and we could not find any references to 155 kHz or 27.4036 GHz. Please point us to where this information appears so that we can correct it. ERP Power Level With regards to the 4000 Watts ERP for the HF systems, this is based on 1000 Watts of RF with a typical 6 dB gain LPDA antenna (1000 Watts minus ~1 dB RF cable loss, plus ~6 to 7 dB antenna gain (x4) = ~4000 Watts ERP). Please note that this is the MAXIMUM power level which would only be used during brief tests. The vast majority of time, we would not exceed 1000 Watts ERP. Tactical and strategic HF systems often require 125W, 400W, 500W or 1000W power levels. Couple these to high gain antennas and the result is a much higher ERP rating. If this exceeds permissible ERP levels, then please advise so that we can update our submission and work with a lower ERP by reducing the gain of the antenna. Please feel free to contact me if you have any questions, Bruno Haineault Director of Engineering Datron World Communications, Inc. Submitted December 12, 2007 File No: 0224-EX-PL-2007 Confirmation No: EL742169 Reference No: 5874


Document Created: 2008-01-08 11:08:34
Document Modified: 2008-01-08 11:08:34
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC